IGS Real-Time clock combination of RT AC submissions

doi: 10.5067/GNSS/gnss_igsrtclk_001

Data Center Citation

Noll, Carey E., The Crustal Dynamics Data Information System: A resource to support scientific analysis using space geodesy, Advances in Space Research, Volume 45, Issue 12, 15 June 2010, Pages 1421-1440, ISSN 0273-1177, http://dx.doi.org/10.1016/j.asr.2010.01.018.

Data Citation

International GNSS Service, IGS Real-Time clock combination of RT AC submissions, Greenbelt, MD, USA:NASA Crustal Dynamics Data Information System (CDDIS), Accessed [[enter user data access date]] at doi: 10.5067/GNSS/gnss_igsrtclk_001.

Other standard citation formats may be used for this data set and can be found at the DOI Citation Formatter website.

More information about CDDIS data citations and acknowledgments is available.

Summary

  • Name: IGS Real-Time clock combination of RT AC submissions
  • Format: RINEX Extensions to Handle Clock Information
  • Spatial Coverage: 90.0 to -90.0, 180.0 to -180.0
  • Temporal Coverage: 2009-01-01 to present
  • Temporal Resolution: Daily
  • File Size: 1 MB
  • Platforms: GNSS (e.g., GPS)

Description

The IGS real-time products can be used to determine precise coordinates of the observing stations, gravity field parameters, and Earth orientation parameters. The IGS derived products are essential for Earth science research; multi-disciplinary positioning, navigation, and timing (PNT) applications; and education.

This derived product set consists of Global Navigation Satellite System satellite and receiver clock combination product (30-second granularity, daily files, generated daily) from the real-time IGS analysis center submissions available from NASA Crustal Dynamics Data Information System (CDDIS). GNSS satellites provide autonomous geo-spatial positioning with global coverage. GNSS data sets from ground receivers at the CDDIS consist primarily of the data from the U.S. Global Positioning System (GPS) and the Russian GLObal NAvigation Satellite System (GLONASS). Since 2011, the CDDIS GNSS archive includes data from other GNSS (Europe’s Galileo, China’s Beidou, Japan’s Quasi-Zenith Satellite System/QZSS, the Indian Regional Navigation Satellite System/IRNSS, and worldwide Satellite Based Augmentation Systems/SBASs), which are similar to the U.S. GPS in terms of the satellite constellation, orbits, and signal structure. The CDDIS provides access to products generated from real-time data streams in support of the IGS Real-Time Service. The real-time observation data from a global permanent network of ground-based receivers are transmitted from the CDDIS in 1 to multi-second intervals in raw receiver or RTCM (Radio Technical Commission for Maritime Services) format.

These real-time data are utilized to generate near real-time product streams. The real-time products consist of GNSS satellite orbit and clock corrections to the broadcast ephemeris. These correction streams are formatted according to the RTCM SSR standard for State Space Representation and are broadcast using the NTRIP protocol. IGS analysis centers (ACs) access GNSS real-time data streams to produce GNSS satellite and ground receiver clock values in real-time. The product streams are combination solutions generated by processing individual real-time solutions from participating IGS Real-time ACs. The IGS Real-Time Analysis Center Coordinator (RTACC) uses these individual AC solutions to generate this real-time IGS combined satellite and receiver clock product. The effect of combining the different AC solutions is a more reliable and stable performance than that of any single AC's product. This clock solution is a batch combination based on daily clock submissions by these IGS real-time analysis centers and have been provided since February 2009, shortly after real-time streams were routinely available through the IGS Real-Time Pilot Project and prior to the availability of real-time product streams. Clock solution files consist of decoded clock results from the real time stream at 10-second intervals. This combination is a daily solution available approximately one to three days after the end of the previous UTC day. All satellite and receiver clock solution files utilize the clock RINEX format and span 24 hours from 00:00 to 23:45 UTC.

Data Access

The IGS Real-Time clock combination of RT AC submissions products are online:

https://cddis.nasa.gov/archive/gnss/products/rtpp

in subdirectories by year, day of year, and data type as follows:

WWWW/igcWWWWD.clk.Z

Code Meaning
WWWW GPS week
D day of week (0-6, 7 indicates weekly)
.Z UNIX compressed file

Documentation

http://cddis.nasa.gov/Data_and_Derived_Products/GNSS/GNSS_data_and_product_archive.html